Contact Us

detail product

SR014 1200M Dual Band Wifi Reapeater Factory|Wifi Signal Amplifier 2.4/5G High-power AP|White

  • $67.00
  • Ex Tax: $67.00
  • Model SR014
  • Availability: In Stock

Available Options

SR014 1200M Dual Band Wifi Reapeater Factory|Wifi Signal Amplifier 2.4/5G High-power AP|White

Code: SR014

Product material: ABS+PC material

Transmission rate: 1200Mbps

Product chip: RTL8812BRH/RTL8197FN

Receiving distance: within 300 meters (depending on the environment)

Bare metal weight: 104.6G

Full set weight: 204.4G

Packing quantity: 40 pcs/carton

Packing weight: 9.45KG/carton

Product protocol: IEEE802.11AC, and simultaneously IEEE802.11B/G/N

Packing list: 1×two L-port dual-frequency repeater 1×English manual (no Chinese manual)

Product features: AP function, WiFi signal enhancement, WiFi signal amplification, WiFi signal extension, wireless to wired, wired to wireless. . .


The area of ​​the home is too large, and the wireless will be weaker if the distance is farther? Multi-sided walls block, the signal is always intermittent? There are always signal blind spots, and Internet entertainment can't do whatever you want?

With the existing wireless router at home, it can expand the wireless signal at a high speed. Balconies, kitchens, bathrooms... where the router can't reach, the signal will be full from now on!

Professional interaction design, simple and immediate style. Setting is easy and easy to use, wireless expansion only needs 3 steps, advanced transparent bridge mode allows you to access the LAN more conveniently

Comply with IEEE802.11n and IEEE802.11g/b standards, wireless transmission rate up to 300Mbps, plug-in design, support one-key connection (wps), support WPA/WPA-PSK, WPA2/WPA2-PSK security mechanism

 product description    

Powerful expansion, high-speed Wi-Fi to enjoy worry-free

The dual-band extender is used with dual-band routers to give full play to the high performance of the two frequency bands and use up the broadband potential.

Extend the dual-frequency signal, let the 2.4GHz and 5GHz signals open around, covering every corner of the home!

Use recipes in the kitchen, Weibo in the loft, and web pages in the balcony. Only with a wide coverage can you have a high-quality experience!

External dual antennas, built-in dual antennas, stronger signal, longer coverage

Strong hardware configuration, exert stronger wireless performance. Four high-gain external antennas, scientific antenna layout,

Improve the isolation between antennas, reduce interference, stronger signals, and wider coverage.

Quick and user-friendly settings. Convenient and quick design in both Chinese and English. The documents are simple and easy to understand, and the application and even the steps are simple and easy to follow. Everyone can quickly start.

Selling point:

1) Up to 1200Mbps transmission rate

2) With four external antennas, the relay signal is more stable

3) RJ45 network port supports wired access

4) WPS one-key encryption button

5) Two working modes of relay/AP

6) Lightweight design, saving freight, Amazon hot style

7) Simple and friendly operation interface, eliminating tedious configuration

Relay mode: Sometimes a device may be in the living room, but because of the poor signal, the signal in the bedroom may be only one bar, which requires further expansion of the wireless network. At this time, you can consider using another wireless router to expand the network through the relay mode. The name of the "amplified" wireless signal is the same as the original wireless router signal name, such as mobile phones, tablets, etc., without manual switching. It is completely dependent on The network covers itself.

Feature: You need to connect to another WiFi signal during relay settings, and keep the WiFi name settings exactly the same.

Applicable scenarios: expand the network and realize signal "roaming" within a certain range

AP mode: AP mode is quite special. Generally, AP hotspot devices have this function. At the same time, AP devices do not have bridging and routing modes, but support relay functions. The difference between relay and AP hotspot is also very simple. The relay mode is actually to extend a wireless network 1:1, and does not require a cable connection, and both routers and AP devices support this mode; AP mode uses a network cable to It expands the WiFi signal, but it is not responsible for managing the network. It is equivalent to a switch with wireless function, which converts the wired signal to wireless. Other functions need to be implemented by the router (assign IP, manage the network, etc.).

Features: Converted to wireless network through network cable, without management and routing functions.

Applicable scenarios: Cover signal blind spots, the function is similar to the relay, but the AP device does not need to be configured, plug and play

Write a review

Note: HTML is not translated!
    Bad           Good